1955 and later Chevrolet Passenger T5 Transmission Adapter (GM T5 with Ford bolt pattern)

(0 customer reviews)

$185.00

Description

 

1955 and later Chevrolet Passenger T5 Transmission Adapter (GM T5 with Ford bolt pattern)

 

This T5 transmission adapter allows you to adapt a GM T5 with the Ford bolt pattern to your Chevrolet passenger car bell housing. Our transmission adapter is designed specifically for a Chevy bell housing with the Muncie or Saginaw bolt pattern.

The adapter positions the clutch disc in the proper place on the input shaft. No modifications are required on the input shaft or clutch disc for installation.

This adapter has a 4 11/16″ diameter transmission register.

This transmission adapter kit contains:
– (1) Adapter Plate
– (2) 3/8-16 x 2 ¼ Studs
– (2) 3/8 lock washers
– (2) 3/8-16 nuts
– (2) 1/2-13 x 2 studs
– (2) 1/2-13 x 1 ¼ cap screw
– (2) 1/2-13 x 1 ¼ flat head screws
– (2) 1/2-13 nuts
– (4) ½ lock washers

Our transmission adapter kit is 100% made in the USA. Our adapter plates are precision-machined from high strength 7075 aluminum alloy.

Please read further to ensure this product suits your needs.

Examples of these transmissions are:
1986 Chevrolet Astro Van
1993-1995 Chevrolet S10
1996-2002 Chevrolet Camaro V6

Examples of the Chevrolet bell housings include the following casting numbers:
3836741
3701433
3835201
3739585
3847679
3899621
462606

2120 KIT PARTS-1

PLEASE NOTE:
1) This transmission adapter kit requires a transmission with an input shaft length of 7 1/8” from the trans mounting surface to the end of the shaft. If your transmission input shaft is shorter, you should install an extended pilot bushing into the crank shaft.
2) On manual clutch applications the throw out bearing sleeve on the bearing retainer need’s to be shortened. This is included in the instructions.

 

Is this Ford pattern T5 to Chevrolet Muncie Bell Housing Transmission Adapter exactly what you’re looking for? Add this product to your cart or call us at (208) 455-7971 to order today!

Additional information

Weight 3 lbs
Dimensions 12 × 9 × 2 in

Reviews

  1. Dave M.

    Hello Hot Rod Works,

    I wanted to say thank you for the great transmission adapter kit you provided. My nephew is back driving his truck and loves the available overdrive. The install went together smoothly and we were impressed with not only the fitment of the parts, but the beauty of the machine work. All items fit/operate as expected.

    Thanks again. We will not hesitate to do business with you again, if needed.

    Dave M

  2. Kaleb R.

    Just wanted to say thanks for the ford t5 to chevy conversion plate. It was very good quality and had very good hardware. I was thinking about making my own but when i noticed the quality of the one you sell, i was glad i didnt atempt it. Every bolt hole was spot on where it needed to be and very well machined..keep up the good work and be blessed.

  3. Odin T.

    I am putting a WC T5 into my 95 vette to replace the clunky 4+3 transmission and OD unit – SO I ordered the adapter plate 2120 GM bellhousing to ford T5 pattern GM transmission adapter. The adapter plate was WAY beyond expectations ! So pretty I almost hated to sandwich it between my T5 and my bellhousing. The machining was TOP NOTCH and the instructions were clear .The bolts and small parts were all there and were high quality. It fit into my bellhousing like a factory part. I ran into an issue with my transmission front bearing retainer (not at all their fault) and they were very helpful and knowledgeable on the phone. I have been hot rodding for 40 years and this is one of the nicest aluminum machined parts I have ever bought.

Add a review

Your email address will not be published.